Unfortunately, we do not have wall mounts for MiniPod MK1, MK2 or MK3 anymore – they were discontinued some years ago.
However, our new MiniPod wall mount fits the size of the older speakers just fine – but unfortunately there are no bushings these speakers to fasten the new wall mount and the speaker.
If you are a bit “handy” or maybe know a carpenter, you can attach the wall mount with 3 good wood screws or self-tapping screws – it just requires drilling 3 small holes in the bottom of the speaker so the plastic cabinet does not crack when you tighten the screws.
In this manual, the screws on page 7 at the bottom need to be replaced with wood screws or self-tapping screws, they should be about 70 mm long – you can probably find some in your local DIY shop.
You’ll find the wall mount you need here:
Remember to lay the speaker on a soft surface / cloth so they won’t get scratched when you work with them.
We have wall mounts in stock that fit the following speakers:
– MicroPod – all versions
– MiniPod MK4 (passive HiFi speaker)
– MiniPod BT MK2 (Bluetooth speaker)
See our page with accessories right here.
Unfortunately, we can no longer offer wall mounts for the following speakers:
– MiniPod MK1, MK2 and MK3 – production of these was discontinued in 2013
– SmallPods – production of these was discontinued in 2014
– CinePod – production of these was discontinued in 2009
During the production years, two different types of batteries have been used; CR2025 and CR2032
If you have a MiniPod you can find a remote control right here.
The remote control fits the MiniPod Bluetooth MK1 with item numbers 13601, 13602, 13603 and 13611. You will find the item number on a small label on the bottom of your speaker.
Log in to the Scandyna Customer Club. Don't have an account? You can.